Filter
Top Products
If you are using the camera for the first time, read this section.
45
3
Press the F button to
change the flash mode.
• The flash mode mark is displayed
momentarily at the center of the
picture display and then a smaller
mark is displayed at the upper left
of the screen.
• The auto focus/flash lamp blinks
while the flash charges. Once the
flash is charged, the lamp turns off and the camera is ready to
shoot.
Note ---------------------------------------------------------------------------------------------------
• When you are finished using the flash, press the center of the flash cover down with
your finger.
• The flash mode setting is saved until you press the F button again.
• The flash does not fire when shooting movies or in multi-shot, auto bracket, white
balance bracket, or color bracket modes.
• When using AAA alkaline batteries, Oxyride batteries, or nickel-hydrogen batteries,
the picture display turns off when the flash is charging.
• The flash fires a pre-flash to increase the AE accuracy.
• You cannot use the internal flash when using an external flash. (GP.227)
Caution-----------------------------------------------------------------------------------------------
You cannot use the internal flash when using the wide conversion lens, tele conversion
lens, and hood.