Filter
Top Products
148
Changing Camera Settings
5
When any of a number of shooting functions is assigned to the ADJ.
lever, you can display the screen for that function with fewer button
operations and without displaying the shooting setting menu.
You can also use [ADJ LEVER SET.1] to [ADJ LEVER SET.4] to
assign a camera function that can be activated by pressing the ADJ.
lever.
To assign a function to [ADJ LEVER SET.1] to [ADJ LEVER SET.4],
follow the steps below.
1
Display the SETUP menu.
• For the operating procedure, see P.135.
2
Press the " button to select [ADJ LEVER SET.1], [ADJ
LEVER SET.2], [ADJ LEVER SET.3], or [ADJ LEVER
SET.4], and then press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
For information on how to use the ADJ. mode, see P.64.
Assigning a Function to the ADJ.
Lever (ADJ LEVER SET.)
Available Settings Refer to
OFF *Default setting for [ADJ LEVER SET.4] -
EXPO.CMP *Default setting for [ADJ LEVER SET.1] P.100
WHT.BAL. *Default setting for [ADJ LEVER SET.2] P.101
ISO *Default setting for [ADJ LEVER SET.3] P.104
QUALITY P.80
FOCUS P.83
IMG SET P.91
AE METER P.86
CONT MDE P.87
AUTO BKT P.93
WITH SND P.98