Filter
Top Products
73
Various Shooting Functions
1
• When the exposure value is between
-2EV and +2EV, the brightness of the
LCD monitor changes according to
the exposure value.
• When the exposure value exceeds
the range of -2EV to +2EV, the
indicator lights orange and the
brightness of the LCD monitor does
not change.
2
Rotate the up-down dial to
change the aperture value.
3
Press the ADJ. lever to the left
or right to change the shutter
speed.
4
Half-press the shutter release
button.
5
Gently press the shutter release button all the way.
Note ----------------------------------------------------------------------------------------------
• To increase the exposure time, lower the shutter speed. In this case, camera shake
may occur. Hold the camera steady with two hands or use a tripod when shooting.
• While shooting with a slow shutter speed, the LCD monitor turns off.
•
When the ISO setting is set to [AUTO] or [AUTO-HI] in manual exposure mode, the ISO
is fixed at ISO 100.
•
AE LOCK does not work in manual exposure mode even if the Fn (Function) button is
assigned to [AE LOCK]. When the Fn (Function) button is pressed, the value is
automatically set closer to the appropriate exposure (closer to the adjust of the
exposure value indicator). This is useful when, for example, you want to change/adjust
the exposure value from closer to the center of the exposure value indicator (the
appropriate exposure).
Caution------------------------------------------------------------------------------------------
• When the shutter speed is set to 15 or more seconds, the function to remove noise
from images operates. Therefore, the time until image recording is complete is about
twice the set shutter speed plus about 8 seconds.
• When the shutter speed is set to 1 or more seconds, the camera shake correction
function cannot be used. When the shutter speed is set to 1 or more seconds while
the camera shake correction function is turned on, E changes to F.
+2EV
-2EV
1280
1280
F4.0
F4.0
1
/
80
1
/
80
9999
9999
M
SD