Ricoh GX100 Digital Camera User Manual


 
If you are using the camera for the first time, read this section.
45
3
Press the F (Flash) button to
change the flash mode.
The flash mode mark is displayed
momentarily at the center of the
LCD monitor and then a smaller
mark is displayed at the upper left
of the screen.
The auto focus/flash lamp blinks
while the flash charges. Once the
flash is charged, the lamp turns off and the camera is ready to
shoot.
Note ---------------------------------------------------------------------------------------------------
When you are finished using the flash, press the center of the flash cover down with
your finger.
The flash mode setting is saved until you press the F (Flash) button again.
The flash does not fire when shooting movies or in multi-shot mode.
When using AAA alkaline batteries, Oxyride batteries, or nickel-hydrogen batteries,
the LCD monitor turns off when the flash is charging.
The flash fires a pre-flash to increase the AE accuracy.
You cannot use the internal flash when using the external flash. (GP.201)
Caution-----------------------------------------------------------------------------------------------
You cannot use the internal flash when using the wide conversion lens or hood.
To use the internal flash with the LCD viewfinder attached, reposition the angle of the
LCD viewfinder.