Ricoh GX100 Digital Camera User Manual


 
If you are using the camera for the first time, read this section.
43
1
With the camera ready to
shoot, press the N (Macro)
button.
N is displayed momentarily at the
center of the LCD monitor and
then N is displayed at the top of
the screen.
2
Compose your picture and half-press the shutter
release button.
3
Full-press the shutter
release button.
To cancel macro mode, press the
N (Macro) button again.
Note ---------------------------------------------------------------------------------------------------
When using the zoom, you can shoot close-ups within the following distances:
The AF target shift function enables you to lock the focus for macro shooting with the
simple touch of a button without moving the camera. This function is useful for
shooting on a tripod. (GP.66)
To take a further close-up picture during macro shooting, use [ZOOM MACRO] in
scene mode. (GP.47)
Shooting Close-Ups (Macro Shooting)
Using the N (Macro) button allows you to take a tight close-up of
the subject. (Macro shooting)
This is good for shooting small subjects because you can shoot up
to approximately 1cm (0.4in.) away from the front edge of the lens.
Distance Shooting Range
Wide-Angle Approx. 1 cm
(from the front edge of the lens)
Approx. 29 mm × 22 mm
Telephoto Approx. 4 cm
(from the front edge of the lens)
Approx. 25 mm × 19 mm
(when digital zoom is not used)
Approx. 6.3 mm × 4.0 mm
(when 4.0× digital zoom is used)