Filter
Top Products
27
SETTING THE TIME AND DATE
The SD15 camera records the date and time when each image is captured
and stores this information with the image. To ensure that the correct
information is recorded with each image, set the camera’s internal clock to
the correct date and time before using the camera for the first time or after
extended periods of disuse.
1
Make sure the camera is turned on.
2
Press the button on the back of the
camera to display the Camera Set-up Menu.
(See P.28)
3
Use the arrows on the 4-way controller
to select [Date/Time].
4
Press the arrow or the button to open
the date/time set-up page.
5
Use the arrows on the 4-way controller
to select a setting and use the
arrows to
cycle through the setting options.
6
Once all changes have been made, press
to save the settings and return to the
main menu.
● Press
at any time to close the date/
time set-up page without saving any of the
changes.
TIP
• The date can be displayed in one of three formats: M/D/Y (month/day/year),
D/M/Y (day/month/year), or Y/M/D (year/month/day). Select the desired
format from “Date Format”.
• The camera’s internal clock is powered by a capacitor that receives its charge
from camera’s battery. If the camera is without battery for an extended
period of time, such as after prolonged storage, the internal clock will need to
be reset.