Sigma SD15 Digital Camera User Manual


 
93
VIEWING IMAGES ON A TV
The SD15 camera can be connected to a television or a videocassette
recorder using the provided video cable, allowing the recorded images to be
viewed on the television monitor or recorded on videotape.
TO CONNECT THE CAMERA
TO A VIDEO DEVICE
1
Open the cover protecting the camera’s
VIDEO OUT, DC-IN, and USB connectors.
2
Connect the video cable to the
VIDEO OUT
terminal on the camera and to the video input
terminal on the television or video cassette
recorder.
3
Turn on the camera and the video device.
WARNING !!
Please do not use any video cable other than provided with your Sigma SD15
camera, when connecting a video input terminal. Using other brands may
cause damage.
TIP
It is recommended that the camera be powered with the provided AC adapter
during television playback to avoid draining the battery.
The default mode for the video signal is NTSC. When connecting the camera
to a PAL device, the Video Mode setting in the Camera Set-up Menu must be
changed. (See P.115)