Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-65
4
3 Push the MENU CANCEL/PRST/ITEM switch repeatedly toward
the ITEM position until the cursor is positioned to the left of the
item you wish to set (or use the rotary encoder).
The items and their meanings are as follows:
DATE: date
TIME: time
MODEL NAME: model name
SERIAL NO.: serial number
CASSETTE NO.: cassette number
SHOT NO.: shot number
ID SELECT: shot ID set in SHOT DATA page
Next press the rotary encoder so that a question mark appears to the
left of the selected item.
4 Turn the rotary encoder to select whether or not to record the
selected item superimposed on the picture.
To carry out superimposed recording: turn the rotary encoder
counterclockwise as seen from the front of the camera to select
“ON”.
Not to carry out superimposed recording: turn the rotary encoder
clockwise as seen from the front of the camera to select “OFF”.
In the ID SELECT item, in order not to carry out superimposed
recording of any shot ID, select “OFF”, and to carry out
superimposed recording of a shot ID, select the shot ID number (1 to
4).
To set other items on or off, continue to step 5. If all item settings
are complete, skip to step 6 to end the process.
(Continued)