Filter
Top Products
Chapter 3 Recording and Playback 3-1
3
Recording and Playback
3-1 About Cassettes
This section describes the procedure for loading and unloading a
cassette.
See “Specifications” (page A-1) for information about the cassettes you can use in
the camcorder.
3-1-1 Loading and Unloading a Cassette
Loading a cassette
Note
If you insert a cassette which has been rewound on a rewinder with no
beginning-of-tape detector into this unit, the “SLACK” indication may
appear to indicate a tape take-up failure. If this happens, press the
EJECT button to eject the cassette, then turn the take-up reel about three
whole turns, and reinsert the cassette.
1 Turn on the POWER switch.
(Continued)
If the interior of the VTR section is damp, the HUMID indicator will light. If
this happens, wait until the indicator goes off before going on to step 2.
HUMID display
POWER switch
LOCK