Filter
Top Products
4-2 Chapter 4 Adjustments and Settings for Recording
4
4-1-1 Adjusting the Black Balance
In automatic black balance mode, the black balance is adjusted after the
black set is adjusted.
Manual black balance adjustment can be selected from the setup menu.
Refer to the Maintenance Manual for information about manual black balance
adjustment.
Follow the procedure below to adjust the black balance.
1 Set the switches as follows:
If you change the setting of the GAIN selector, a message reporting
the set position appears in the setting change and adjustment
progress message display area of the viewfinder screen for about 3
seconds (in display mode 3).
OUTPUT/DCC: CAM
GAIN: Set as low
as possible.
MENU ON/OFF/PAGE: OFF