Filter
Top Products
Even if you press EASY, menu
settings do not switch to their
defaults automatically.
•Following menu settings remain as they were
set even during Easy Handycam operation
(p. 34).
[MOVIE MEDIA SET]
- [PHOTO MEDIA SET]*
[AUDIO MODE]*
- [WIDE SELECT]
- [SUB-T DATE]
[[_FACE SET]
- [[iTIMAGE SIZE]
[FILE NO.1
- [VOLUME]
[BEEP]
- [TV TYPE]
- [CLOCK SET]
[AREA SET]
- [DST SET]/[SUMMERTIME]
- [{_] LANGUAGE SETI
[DEMO MODE]
* [)CR-DVD851t
Your camcorder vibrates.
• Vibration occurs depending on the condition
of the disc. This is not a malfunction.
A vibration is felt in your hand or a
faint sound is heard during
operation.
• This is not a mall'unction.
A motor sound is heard in the
camcorder when the disc cover is
closed without a disc.
• Your camcorder is trying to recognize the
disc. This is not a malfunction.
Your camcorder gets warm.
• This is because the power has been turned on
Ibr a long time. This is not a mali'unction.
Turn off your camcorder and leave it for a
while in a cool place.
The power abruptly turns off.
• When approximately 5 minutes have elapsed
while you do not operate your camcorder, the
camcorder is automatically turned oil'
(A.SHUT OFF). Change the setting of
[A.SHUT OFF] (p. 87), or turn on the power
again, or use the AC Adaptor.
• Charge the battery pack (p. 22).
The CHG (charge) lamp does not
light while the battery pack is being
charged.
• Turn the POWER switch to OFF (CHG)
(p. 22).
• Attach the battery pack to the camcorder
correctly (p. 22).
• Connect the power cord (mains lead) to the
wall outlet (wall socket) properly.
• The battery charge is completed (p. 22).
The CHG (charge) lamp flashes while
the battery pack is being charged.
• Attach the battery pack to the camcorder
correctly (p. 22). If the problem persists,
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. The battery pack may be damaged.
The remaining battery time indicator
does not indicate the correct time.
• The ambient temperature is too high or too
low. This is not a malfunction.
• The battery pack has not been charged
enough. Fully charge the battery pack again.
If the problem persists, replace the batter3,,
pack with a new one (p. 22).
• The indicated time may not be correct
depending on the environment of use.
.-.I
S
g
g
g=
co,,.,,uoa... 103