Filter
Top Products
You can at[just the color balance to the
brightness of the recording environment.
• AUTO
The "ahite bahmce is adjusted
automatically.
OUTDOOR (_÷)
The "ahite bahmce is adjusted to be
appropriate for the following recording
conditions:
Outdoors
Night views, neon signs and fireworks
Sunrise or sunset
Under daylight fluorescent lamps
INDOOR (=,,5,_)
The "ahire bahmce is adjusted to be
appropriate for the following recording
conditions:
Indoors
At party scenes or studios where the lighting
conditions change quickly
tinder video lamps in a studio, or under
sodium lamps or incandescentqike color
lamps
ONE PUSH (_."._)
The "ahire bahmce will be adjusted
according to the ambient light.
(_) Touch [ONE PUSH].
@ Frame a white object such as a piece of
paper, to fill the screen under the same
lighting conditions as you will record
the subject.
@ Touch [lxm.d].
t-,mz:lflashes quickly. When the white
balance is adjusted and stored in the
memory, the indicator stops flashing.
O Notes
• Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool white
fluorescent lamps.
• When you select [ONE PUSH], keep fl'aming
white ohject while ixmzlis flashing quickly.
• tz_m_ flashes slowly if lONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if t:xmz5keeps
flashing after touching [_, set [WHITE
BAL.] to [AUTO].
• If you set [WHITE BAL.], [SCENE
SELECTION] is automatically set to [AUTO].
"_" Tips
• It" you changed the hattery pack, or moved your
camcorder to or licorn outdoors when [AUTO]
was selected, aim your carncorder at a nearby
white ohject with [AUTO] [br about 10 seconds
for better color balance adjustment.
• If you changed the [SCENE SELECTION]
setting or moved your carncorder to or from
outdoors during white balance setting with
lONE PUSH], you need to repeat the [ONE
PUSH] operation.
You can record a transition with the
following effects adding to the interval
between scenes.
(_) Select the desired effect ida[STBY] (during
fading in) or [REC] (during fading out)
mode, then touch [_.
@ Press START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
To cancel the fader before starting the
operation, touch [OFF] in step (_).
If you press START/STOP, the setting is
cleared.
Fading out
WHITE FADER
BLACKFADER
Fading ida
Continued,_ 93
=_
I/}
3
N
=_
¢-a
3
g