Filter
Top Products
Step 2: Chargingthe batterypack
POWER switch
22
Battery
Jack cover
DC plug
DC IN jack
CHG(charge) lamp5_--'_5 HG i
To the wall outlet
AC Adaptor 4 (wall socket)
Power cord (mains lead)
You can charge the "InfoLITHIUM"
battery pack (H series) (p. 121) after
attaching it to your camcorder.
(3 Notes
• Your camcorder operates only with
"InfoLITHlUM" battery pack (H series).
4
/ Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
4 Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
The CHG (charge) lamp lights up and
charging starts.
5 The CHG (charge) lamp turns off
when the battery is fully charged.
Disconnect the AC Adaptor from
the DC IN jack.
e.t
/ Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
3 Connect the AC Adaptor to the
DC IN jack of your camcorder.
Open the ,jack cover, and connect the
DC plug of the AC Adaptor.
Match the • mark on the DC plug with
the • mark on your camcorder.
(3 Notes
•Disconnect the AC Adaptor fronl the DC 1N
jack holding both the camcorder and the DC
plug.