Filter
Top Products
Step 3: Turningthe poweron, and setting the
date andtime
Set the date and time when using this
camcorder for the first time. If you do not
set the date and time, the [CLOCK SET]
screen appears every time you turn on your
camcorder or change the POWER switch
position.
Touch the button on the LCD screen.
/2
1 While pressing the green button,
turn the POWER switch
repeatedly in the direction of the
arrow until the respective lamp
lights up.
(Movie): To record movies
(Still): To record still images
Go to step 3 when you turn on your
carncorder for the first time.
2 Touch _ (HOME) --_
m_(SETTINGS) --_ [CLOCK/
[] LANG] --_ [CLOCK SET].
The [CLOCK SET] screen appears.
3 Select the desired geographical
area with DID, then touch
[NEXT].
4 Set [DST SET] or [SUMMERTIME],
then touch [NEXT].
5 Set [Y] (year) with _/D.
6 Select [M] with D/_, then set
the month with _/D.
7 Set [D] (day), hour and minute in
the same way, then touch [NEXT].
O Make sure that the clock is
correctly set, then touch I_ffl.
The clock starts.
You can set any year up to the year
2037.
For midnight, set it to 12:00 AM.
For midday, set it to 12:00 PM.
Toturnoff thepower
Turn the POWER switch to OFF (CHG).
The _ (Movie) lamp flashes for a few
seconds, and the power turns off.
g.
Continued._ 25