Filter
Top Products
Step 4: Making adjustmentsbefore recording
Slide the LENS COVER switch to OPEN.
• Touch _/HOME) ---+ _ (SETTINGS) ---+
[SOUND/DISP SET] ---+ [LCD BRIGHT]
(p. 85), and adjust lhe brightness of the LCD
screell.
• The information is displayed or bidden (display
ilo display) each lime you press D1SP.
After recording, set the LENS COVER
switch to CLOSE to close the lens cover.
i !!!iil
Open the LCD panel 90 degrees to the
camcorder ((_)), then rotate it to the best
angle to record or play ((g)).
@90 degrees to the
camcorder
@90 degrees
(max.)
You can view images using the viewfinder
to avoid wearing down the battery, or when
the image seen on the LCD screen is poor. ,._
Pull out and look into the viewfinder. €_
At!just the viewfinder to your eyesight. "_
g.
Viewfinder
Viewfinder lens
adjustment lever
Move it until the
image becomes clear.
@180 degrees DISP
(max.)
0 Notes
• Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
-_i- Tips
• If you ()pen the LCD panel 90 degrees to the
camcorder, then rntate it 180 degrees to the lens
side, you can close lhe LCD panel wilh lhe LCD
screen facing oul. This is c(mvenienl during
playback operalicms.
At!just and fasten the grip belt as illustrated,
and hold your camcorder properly.
27