Filter
Top Products
Usethediscswithmarkslistedbelow,See
page14fordetails,
r_vD*_ tie
For reliability and durability of recording/
playback, we recommend using Sony discs.
0 Note
• Using an uncertificated disc may in a lbw case
cause unsatisfactory recording/playback.
Typesof "MemoryStick" mediayou
canuseinyourcamcorder
• For recording movies, it is recommended
that you use "Memory Stick PRO Duo"
media of 512 MB or lm'ger marked with:
MEMORY STICK PRO DUO ("Memory Stick
PRO Duo" media)*
MEMORYSTIfl(PRO-HGDUQ ("Memory Stick
PRO-HG Duo" media)
* Youcan use "Memory Stick PRODuo"
media markedeither with "Mark2" or
without.
• See page 33 for the recordable time of
"Memory Stick PRO Duo" media.
"Memory Stick PRO Duo" media/"Memory
Stick PRO-HG Duo" media
(This size can be used with your
camcorder.)
"Memory Stick" media
(You cannot use it inyour camcorder.)
• "Memory Stick PRO Duo" media and
"Memory Stick PRO-HG Duo" media are
both referred to as "Memory Stick PRO
Duo" media in this manual.
• You cannot use any type of memory card
other than those mentioned above.
• "Memo U Stick PRO Duo" media can be
used only with "Memory Stick PRO"
media compatible equipment.
• Do not attach a label or the like on
"Memory Stick PRO Duo" media or a
"Memory Stick Duo" media adaptor.
• When using "Memory Stick PRO Duo"
media with "Memory Stick" media
compatible equipment, be sure to insert
the "Memory Stick PRO Duo" media into
the "Memory Stick Duo" media adaptor.
Usingthe camcorder
• Do not hold the camcorder by the
following parts.
Viewfinder LCD screen
Battery
• The camcorder is not dustproofed,
dripproofed or waterproofed. See "About
handling of your camcorder" (p. 123).
• To prevent media from being broken or
recorded images from being lost, do not
do the following when either of the
(Movie)/_ll (Still) lamps (p. 25) or the
ACCESS/access lamps (p. 30, 32) are on:
to remove the battery pack or AC
Adaptor from the camcorder
to apply mechanical shock or vibration to
the camcorder
• When connecting your camcorder to
another device with a cable, he sure to
insert the connector plug in the correct
way. Pushing the plug forcibly into the
terminal will damage the terminal and
may result in a malfunction of your
canlcorder.
Continued,_ 7