Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-47
4
2 Push the MENU ON / OFF / PAGE switch repeatedly to PAGE until
the ‘!’ LED page shown below appears (or use the PAGE + UP /
DOWN function).
‘!’ LED page (factory settings)
3 Push the MENU CANCEL / PRST / ITEM switch repeatedly to
ITEM until the cursor reaches the desired item (or use the ITEM +
UP / DOWN function).
4 Press the UP or DOWN button to specify whether the indicator
is to light (ON) or is to remain off (OFF) if the event corresponding
to the selected item occurs.
To turn it ON : Press the UP button. An asterisk (*) appears to the
left of the item name.
To turn it OFF : Press the DOWN button. A bullet (•) appears to
the left of the item name.
Push the MENU CANCEL / PRST / ITEM switch to CANCEL /
PRST to turn off the setting.
To turn the setting of another item ON or OFF, repeat steps 3 and 4.
Select whether the indicator is to light for each of the following item
conditions.
When the gain is set to anything but
0 dB
When the SHUTTER selector is at ON
When the WHITE BAL switch is at
PRST
When the lens extender is in use
When the two-part FILTER selector is
set to anything but 1 B
When the reference value of the
automatic iris adjustment is anything
but the standard value
(Continued)