Filter
Top Products
Chapter 3 Recording and Playback 3-3
3
Unloading a cassette
With the power supply on, press the EJECT button to open the cassette
lid, then take out the cassette. If you are not going to insert another
cassette, close the cassette lid.
It is possible to take out the cassette and close the cassette lid unless the
battery voltage drops below about 9 V.
Unloading a cassette manually
If the battery voltage drops below about 9V, take out the cassette
manually as illustrated below.
Unloading a cassette manually
You need not to return the screw to its original position after taking out
the cassette. The cassette lid is not locked, but turning on the power
activates it normally again.
1 Turn the power off.
2 Open this rubber cover.
3 Pushing on the screw inside
with a screwdriver, turn the
screw counterclockwise
until the cassette lid opens.
Cassette lid