Filter
Top Products
4-54 Chapter 4 Adjustments and Settings for Recording
4
4-8-2 Selecting the Display Items
To select the items to be displayed on the viewfinder screen from the VF
DISPLAY page, turn on or off the indication next to each item. Selection
of the following items can be turned on or off on the VF DISPLAY page.
• Display mode (For more information, see Section 4-8-3 “Display
Mode and Setting Change and Adjustment Progress Messages” (page
4-57).)
• Extender indicator
• Zoom position indicator
• Filter indicator
• White balance memory indicator
• Gain indicator
• Shutter speed and mode indicator
• Remaining tape indicator
• Iris opening indicator
• Camera ID indicator (If the OUTPUT / DCC selector is set to BARS,
DCC OFF, the camera ID is output together with the color bar signal.
For more information, see Section 4-8-5 “Setting the Camera ID (page
4-61).)
Selecting the display items
Follow the procedure below to select the items to be displayed on the
viewfinder screen.
Selecting the display items