Filter
Top Products
3-10 Chapter 3 Recording and Playback
3
If you turn off the power during a recording pause
Follow the procedure below to continue recording.
Continuous recording after turning off the power during a recording pause
1 Turn on the power again.
2 Press the RET button on the lens. (Make sure that CAM RET. is set
to OFF on the FUNCTION 2 / 2 page of the setup menu. For more
information, see Section 4-9-2 “Selecting the Functions” (page 4-
69).)
The camcorder positions the tape at the appropriate point. Note,
however, that this function works only for continuously recorded
material or consecutively joined segments totaling at least 4 seconds
in length.
3 Press the VTR START button on the camcorder or the VTR button
on the lens to start recording.