Filter
Top Products
4-26 Chapter 4 Adjustments and Settings for Recording
4
2 Set the F-RUN / R-RUN switch to SET.
3 Set the REAL TIME switch to OFF.
4 Set the user bits, using the SHIFT and ADVANCE buttons.
SHIFT : Selects a digit to set. Each time you press it, the flashing
column moves one to the right.
ADVANCE : Increments the value of the flashing digit.
Hexadecimal digits A to F are displayed as follows:
Hexadecimal A B C D E F
Display A b C d E F
5 Set the F-RUN / R-RUN switch to F-RUN or R-RUN.
The specified user bits will be recorded in the LTC and VITC.
Storing the user bits in memory
The user bits setting (apart from the real time) is stored in memory when
the power is turned off.