Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-25
4
4-5 Setting the Time Data
4-5-1 Setting the User Bits
Note
If you are using the time code and the user bits, set the user bits first.
Setting the time code first will cause an error because the time code
generator stops while the user bits are being set.
By setting the user bits (up to hexadecimal 8 digits), you can record user
information such as the date, time, or scene number on the time code
track.
Follow the procedure below to set the user bits.
Setting the user bits
1 Set the DISPLAY switch to U-BIT.
(Continued)
Illustration : DVW-700 / 700WS (for the NTSC broodcast system)