Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-79
4
Inserting the setup card
Hold the setup card with the “SONY” logo facing you so you can read it,
slide it into the insertion slot, then close the lid.
Inserting the setup card
Note
Make sure that you can read the “SONY” logo when you insert the card.
If there is some resistance when you insert the card, the card might be
turned around or upside down. Do not force the card into the slot. Check
that the card is correctly oriented, then try inserting it again.
Note for using and storing the setup card
The following points apply to the use and storage of a setup card.
• Avoid high temperature and humidity.
• Make sure the card does not get dirty or wet.
• Avoid static electricity.
• Store the card by inserting it into the camcorder and closing the card
insertion lid.