Filter
Top Products
10
Locations and Functions of Parts
Chapter 1 Overview
1-3 Locations and Functions of Parts
1-3-1 Camera Head
Front panel
a VF1 (viewfinder 1) connector (20-pin)
Connect a viewfinder (optional).
b CONTROL PANEL connector
Connect with the CAMERA connector of the supplied
assistant panel (page 15).
c Accessory receptacles
Using these screw holes in combination with the accessory
pockets (page 11) on the left side, you can fix a certain
accessory to the left side of the camera.
d VF2 (viewfinder 2) connector (20-pin)
Connect a second viewfinder (optional), e.g. for an
assistant.
e LENS connector (12-pin)
If you mount an optional lens with a cable, connect the
cable to this connector. You can control the functions of the
lens through this connector.
f Viewfinder shoe
Attach an optional viewfinder.
The height of the attaching position can be adjusted.
For details, see “2-4 Attaching a Viewfinder” (page 21).
g Lens fixing lever
Push the lever downward to secure the lens in the lens
mount. To remove the lens, pull up on the lever.
For details, see “2-3 Attaching a Lens” (page 20).
h Lens mount cap
Cover the lens mount with this cap when a lens is not
attached. The cover may be removed by rotating the lens
fixing lever upwards.
CTRL
VF2
LE
N
S
VF1
b CONTROL PANEL connector
c Accessory receptacles
d VF2 connector
e LENS connector
f Viewfinder shoe
Lens mount
h Lens mount cap
a VF1 connector
g Lens fixing lever