Filter
Top Products
37
Setting the Camera Outputs
Chapter 3 Basic Adjustments and Settings
To apply fixed gamma to the monitor
picture
MONI GAMMA ENABLE
If this is set to ON, fixed gamma (ITU-R709) appropriate
for monitoring
1)
is applied to the video signals output from
the VF1, VF2, MONITOR OUT HD SDI 1/2, or REMOTE
connector. The video output signals from those connectors
are selected on the <MONITOR OUTPUT> page.
This setting is effective when S-LOG gamma is applied to
the video output signals for recording intended for post-
production editing.
2)
To monitor the playback picture
The playback picture of the recorder can be confirmed with
a monitor connected to the camera or on the viewfinder
screen.
3)
PB
The playback-signal output mode can be selected for each
VF, MONI, or VBS signal.
If the recorder is turned off with PB ON, the picture on the
viewfinder/monitor screen is distorted. The normal picture
is restored by turning the recorder on or setting PB to
AUTO or OFF.
To compare the playback picture and
camera image
The playback picture and camera image can be displayed
on the same screen when the playback-signal output mode
is set to ON or AUTO for the item PB on the <PB/MONI
GAMMA> page and if PB MIX is set to ON.
PB MIX
The playback-signal mix mode can be independently set to
ON or OFF for each VF, MONI, or VBS signal. When set
to ON, the playback picture and camera image are mixed.
How this is to be displayed can be set on the <PB MIX
SETTING> page of the USER (OPERATION) menu.
<PB MIX SETTING> page
MIX TYPE
How the picture is to be displayed can be selected.
MIX
When MIX TYPE is set to MIX, how to mix the pictures
can be selected.
WIPE
When MIX TYPE is set to WIPE, how pictures are to be
wiped can be selected.
Setting Signal
ON The playback picture of the recorder is always
output.
AUTO Normally, the camera image is output. When
the recorder enters playback mode (PLAY, FF,
REW, or REC REVIEW,) the playback picture
is automatically selected.
OFF The camera image is always output. (Default)
Note
Setting How to display
MIX The playback picture and camera image are
overlapped. (Default)
WIPE The screen is horizontally or vertically split in
two, and two pictures are displayed
simultaneously.
Item Setting Content
DIRECTION CAM The playback picture is gradually
mixed into the camera image.
(Default)
PB The camera image is gradually
mixed into the playback picture.
MODE Y-MIX The Y signals are mixed. (Default)
WIRE(W) Only the outline components are
mixed and displayed with white
lines.
WIRE(B) Only the outline components are
mixed and displayed with black
lines.
LEVEL 0 to 80% The mix level can be adjusted.
(Default: 80%)
Item Setting Content
LAYOUT HOR Horizontally split (Default)
VERT Vertically split
<PB MIX SETTING> U10
MIX TYPE :
B
MIX
MIX
DIRECTION : PB
MODE : Y-MIX
LEVEL : 80%
WIPE
LAYOUT : HOR
PB POSITION : RIGHT
BOUNDARY : 960