Filter
Top Products
86
File Operations
Chapter 5 Storage and Retrieval of User Setting Data
Position the pointer to the item you wish to reset then push
on the MENU SEL/ENTER dial.
To reset a specific item in the reference file
to the initial setting
The items in the reference file can be reset individually.
1
On the <FILE PRESET> page, set 10 SEC CLEAR to
ON.
2
Shift to the menu page on which the item you wish to
reset is located. Position the pointer to the item you
wish to reset then hold the MENU SEL/ENTER dial
pressed.
Continue to hold the MENU SEL/ENTER dial pressed
after the pointer changes to a question mark (?).
After about 3 seconds, the current setting of the
corresponding item will be reset to the initial setting,
and “CLEARED” will be displayed.
If the dial is continuously held pressed, after about
additional 7 seconds, the setting of the corresponding
item that is stored in the reference file will be reset to
the initial setting, and “REF CLEARED” will be
displayed.
To reset the files and settings collectively
All files except the OHB file can be reset simultaneously.
Position the pointer to FILE PRESET (–OHB) on the
<FILE PRESET> page then push on the MENU SEL/
ENTER dial. The message “POWER OFF TO SET” will
be displayed. Set the POWER switch of the camera to OFF.