Filter
Top Products
84
File Operations
Chapter 5 Storage and Retrieval of User Setting Data
5-3-5 Storage and Retrieval of the
Reference File
Use the <REFERENCE> page of the FILE menu.
To retrieve the reference file (standard
settings) stored in built-in memory
Position the pointer to STANDARD and push on the
MENU SEL/ENTER dial.
To store the reference file in built-in
memory
Perform necessary settings for the reference-file items you
wish to store.
Position the pointer to STORE FILE and push on the
MENU SEL/ENTER dial.
To store the reference file in a “Memory
Stick”
1
Insert a “Memory Stick” into the “Memory Stick” slot
of the camera.
2
Position the pointer to WRITE (CAM t MS) and
push on the MENU SEL/ENTER dial.
You can add a comment (maximum: 14 characters) to the
reference file to be stored in the “Memory Stick” by
specifying it on the FILE ID line.
For details on how to enter a comment, see “Specifying a
character string” (page 54).
To retrieve the reference file stored in the
“Memory Stick”
The reference file stored in the “Memory Stick” can be
read out into built-in memory of the camera.
1
Insert the “Memory Stick” into the “Memory Stick”
slot of the camera.
2
Position the pointer to READ (MS t CAM) and push
on the MENU SEL/ENTER dial.
The camera will be adjusted according to the data of the
reference file.
5-3-6 Reading of the User Gamma
To read out gamma-curve (User Gamma) data that have
been created using CvpFileEditor application software
from the “Memory Stick,” use the <USER GAMMA>
page of the FILE menu.
Insert the “Memory Stick” into the “Memory Stick” slot of
the camera. Position the pointer to READ (MS t CAM)
and push on the MENU SEL/ENTER dial.
For details on how to use the User Gamma, see “3-11-3
Using the User Gamma” (page 47).
5-3-7 Storage of the OHB File
Use the <OHB FILE> page of the FILE menu.
1
Execute STANDARD on the <REFERENCE> page of
the FILE menu.
2
Using the MAINTENANCE menu, perform necessary
settings for the items marked with “a” in the “O”
column of the table in “5-2 List of Items Stored in
Files” for the file you wish to store.
3
Call up the <OHB FILE page of the FILE menu,
position the pointer to STORE FILE then push on the
MENU SEL/ENTER dial.
Adjusting the ND offset values
White balance may be slightly shifted in each ND filter
setting. In such a case, adjust the offset values.
<REFERENCE> F03 TOP
STORE FILE
STANDARD
READ (MS
t
t
CAM)
WRITE (CAM
t
MS )
FILE ID:
CAM CODE
DATE
<USER GAMMA> F04 TOP
c
READ (MS
t
CAM)
FILE ID
CAM CODE
DATE
<OHB FILE> F06 TOP
c
STORE FILE