Filter
Top Products
33
Basic Settings with the Subdisplay
Chapter 3 Basic Adjustments and Settings
3-2-10 Allocation of Functions to
the Assignable Buttons and Switch
Various functions can be allocated to assignable buttons 1
to 3 and assignable switch 4 (the upper position of the 4/
AUTO BLK BAL switch) that are located on the side of the
camera and on the assistant panel.
At shipment, the ND-filter select function is allocated to
button 1, and the CC-filter select function is allocated to
button 2. No function is allocated to button 3 and switch 4.
Functions that can be allocated to assignable
buttons 1 to 3
Functions that can be allocated to assignable
switch 4
Even if AWB is allocated to assignable switch 4, AWB
does not function in Cine mode.
Assignable buttons 1/2 setting page
The functions of buttons 1 and 2 can be assigned on the
first and second line, respectively.
Assignable button 3/switch 4 setting page
The functions of button 3 and switch 4 can be assigned on
the first and second line, respectively.
3-2-11 Brightness Adjustment of the
Subdisplay
The brightness of the subdisplay can be adjusted, in eight
levels.
Subdisplay brightness adjustment page
The higher the value, the brighter the display.
Menu
indication
Function
ND Selection of the ND filter
CC Selection of the CC filter
REC REVIEW With REC REVIEW set to NORM on the
SRW-1, the last part of the recorded tape is
normally rewound for 3 seconds
(maximum: 10 seconds) then played back.
With REC REVIEW set to ALL on the SRW-
1, the tape is rewound to the recording start
position then played back.
PB(VF) The video signals being played back on the
SRW-1 are output to the viewfinder.
VF709GAM ON/OFF of the fixed ITU-R709 gamma of
the viewfinder
MONI709GAM ON/OFF of the fixed ITU-R709 gamma of
the monitor
FAN MODE Switching of Fan Operation mode
OFF None
Menu
indication
Function
AWB Automatic white balance adjustment
BARS Color-bar indication
TEST1 Test signal output
OFF None
Note
AS1:ND
AS2:CC
AS3:REC REVIEW
AS4:OFF
BRIGHT:1