Filter
Top Products
50
Detailed Setting of the Video Format
Chapter 3 Basic Adjustments and Settings
<OUTPUT FORMAT> page of MAINTENANCE
menu
CURRENT
The current format is displayed.
Specify the desired format, using the lines under NEXT.
SCAN
Select the scan mode: PROGRESSIVE or INTERLACE.
FRAME
Select the frame rate. When you select INTERLACE for
the scan mode, select 29.97 to specify 59.94I or select 25
to specify 50I.
SIGNAL
Select the signal format.
SELECT FPS
Set to ON to use the Select FPS function.
For details on the Select FPS function, refer to the
Operation Manual of the SRW-1 HD Portable Digital
Recorder.
When the settings are completed, position the pointer at
SET FORMAT and push on the MENU SEL/ENTER dial.
The format is changed, and the new format is displayed on
the CURRENT line.
• If you select the format in invalid combination (e.g., 60P
and 4:4:4), SET FORMAT is displayed in parentheses,
and the format cannot be changed.
• If the recorder refuses the format change by the above
procedure, the message “UNSUPPORTED FORMAT”
is displayed for three seconds.
Notes
<OUTPUT FORMAT> M07 TOP
CURRENT 23.98PsF 4:4:4
NEXT
SCAN :
c
PROGRESSIVE
FRAME : 23.98
SIGNAL : 4:4:4 RGB
SELECT FPS: OFF
SET RORMAT