Filter
Top Products
79
List of Items Stored in Files
Chapter 5 Storage and Retrieval of User Setting Data
manually adjusted values of the camera will be reset to the
reference values that have been stored in the reference file.
At shipment, the reference file with the initial settings is
stored in built-in memory.
The initial settings can be modified, as required, then
stored as the new reference file.
For file operation, use the <REFERENCE> page of the
FILE menu. You can also use the MSU-900/950 Master
Setup Unit for file operation.
You can back up the reference file in a “Memory Stick.”
• In Cine mode, the reference file data are fixed as those at
shipment and cannot be modified.
• As relative adjustment values with regard to the
reference file data are stored in a scene file, if data of the
reference file are modified, the scene files also need
modification.
Items stored
The items that are stored in the reference file are marked
with “
a” in the “R” column of the table in “5-2 List of
Items Stored in Files”.
User-Gamma file
The gamma-curve data (User Gamma) created using
CvpFileEditor application software can be loaded to the
camera via a “Memory Stick.” This enables reproduction
of images closer to those that individual users wish to
reproduce.
For file operation, use the <USER GAMMA> page of the
FILE menu.
The User-Gamma file is stored in built-in memory. Backup
of the User-Gamma file in a “Memory Stick” is not
possible.
In Cine mode, operation of the User-Gamma file via a
“Memory Stick” is not possible.
OHB file
The OHB file stores the offset values of items specific to
the CCD unit.
For file operation, use the <OHB FILE> page of the FILE
menu. You can also use the MSU-900/950 Master Setup
Unit for this operation.
In Cine mode, the OHB file can be retrieved automatically,
but the data in the OHB file cannot be modified.
Items stored
The items that are stored in the OHB file are marked with
“a” in the “O” column of the table in “5-2 List of Items
Stored in Files”.
5-2 List of Items Stored
in Files
The items that are stored in scene files, the reference file,
the lens files, and the OHB file are listed in the table below.
For details on setting values, see the corresponding items
in the table in “4-3 Menu List” (page 55).
S: Scene file
R: Reference file
L: Lens file
O: OHB file
Notes
Note
Note
Menu page
(No.)
Item S R L O
<VIDEO LEVEL>
(P02)
WHITE [R] [G] [B] aa
WHITE [R] [B] aaa
BLACK [R] [G] [B] [M]
aa
FLARE [R] [G] [B] aaa
V MOD [R] [G] [B] [M]
FLARE ON/OFF aa
V MOD ON/OFF a
<GAMMA>
(P03)
LEVEL [R] [G] [B] [M]
aa
COARSE aa
TABL E aa
GAMMA ON/OFF aa
<BLACK
GAMMA>
(P04)
LEVEL [R] [G] [B] [M]
aa
RANGE aa
RANGE ON/OFF aa
BLACK GAMMA
ON/OFF
aa
<SATURATION>
(P05)
SATURATION aa
SATURATION ON/
OFF
aa
LOW KEY SAT aa
RANGE aa
<KNEE>
(P06)
K POINT
[R] [G] [B] [M]
aa
K SLOPE
[R] [G] [B] [M]
aa
KNEE ON/OFF aa
KNEE SAT aa
KNEE SAT ON/OFF aa
AUTO KNEE aa
POINT LIMIT aa
SLOPE aa
<WHITE CLIP>
(P07)
W CLIP [R] [G] [B] [M]
aa
W CLIP ON/OFF aa