Filter
Top Products
88
Using the MSU-900/950
Appendixes
Monitoring the Camera Image
Settings on this camera
Set RM VIDEO to VBS on the <MONITOR OUTPUT>
page of the USER (OPERATION) menu.
Settings on the RM-B750
Press the MONITOR button. The camera image will be
displayed on the display of the RM-B750.
VBS signals are fed to an external monitor if connected via
the MONITOR connector of the RM-B750.
Using the MSU-900/950
You can adjust this camera from the MSU-900/950 Master
Setup Unit via an Ethernet cable.
You can use either Bridge mode to control a camera from
an exclusive MSU-900/950 or Multi mode to control
multiple cameras from one MSU-900/950 or from multiple
remote controllers, including the MSU-900/950 via a
HUB.
Connections
Bridge mode
For using one camera on an Ethernet network.
Using an Ethernet cable, connect the MSU-900/950 to the
(network) connector of this camera.
You may use the remote cable connection simultaneously.
Multi (MCS) mode
Connect the Ethernet cable connected to the (network)
connector of this camera to the HUB.
You may use the remote cable connections simultaneously.
• Remote cable connections will be invalid if the master
unit is not connected to the same network.
• If the master-specified MSU-900/950 is off, all the
network/remote communications are disabled.
• Do not connect devices having the same IP address to the
network.
• Do not connect cameras having the same ID number to
the network. Communications would be disabled on
both cameras.
Notes
123
LOCK
VF MENU/DISPLAYCANCEL/STATUS
4
AUTO
BLK
BAL
PAGE
RUN
SET
CLEAR
FILTER
ND
1
1/4 ND
2
1/16ND
3
1/64ND
4
CAP
5
5600K
CC
A
3200K
B
4300K
C
6300K
D
1/2 ND
E
1
1
PRO
REMOTE
REMOTE
60
5.6
8
11
16
CL
2.8
2
1.6
T
ff
4
30
20
15
12
10
8
7
6
5.6
5
4.6
MSU-900/950
RM-B150
Example