Filter
Top Products
21
Attaching a Viewfinder
Chapter 2 Installation and Preparations
8
Repeat steps 4 through 7 until the image is focused at
both telephoto and wide angle.
9
Tighten the Ff ring lock screw.
1) Flange focal length: The distance between the lens mount attachment
plane and the imaging plane
2) Ff: Abbreviation of flange focal length
2-4 Attaching a
Viewfinder
When the viewfinder is attached, do not leave the camera
with the eyepiece facing the sun. Direct sunlight can enter
through the eyepiece, be focused in the viewfinder and
cause fire.
For details on the viewfinder, refer to the instruction
manual of the viewfinder.
1
If the viewfinder must be attached higher, loosen the
two screws, using the 2.5-mm wrench stored in the
wrench box (page 14) to detach the viewfinder shoe,
and attach it to the upper position using the upper
screw holes.
2
Fit the viewfinder to the viewfinder shoe and slide the
viewfinder horizontally.
The viewfinder stopper automatically pops down.
3
Set the viewfinder to the most convenient position,
tighten the viewfinder positioning ring (1 in the
figure below), and connect the viewfinder cable to the
VF1 connector of the camera (2 in the figure below).
Note
V
F
1
C
T
R
L
V
F
1
Stopper