Filter
Top Products
18
Attaching Accessories
Attaching the Lens to the Camera
Attach a hanger-mount-type lens recommended by Sony.
For details on the lens, refer to the instruction manual
furnished with the lens.
To attach, proceed as follows:
Be sure to check the following two points before attaching
the lens:
• That the pan-lock and tilt-lock levers on the tripod are
fixed.
• That there is not a pin at part A on the lens shown in the
figure below (if there is, remove it). If the pin cannot be
removed, consult your Sony representative.
1
Loosen the lens-lock knob and turn the lens lock
counterclockwise to the horizontal position.
2
Align the pin on the lens with the U-shaped notch, then
hook the edge of the lens on the projection of the
camera.
3
Couple the lens to the camera.
4
Turn the lens lock clockwise, then fasten the lens-lock
knob.
Note
1
1
4
2
1
A
3
Lens
Pin
U-shaped notch
Projection
Lens lock
Edge
Lens-lock knob