Filter
Top Products
27
Menu Operations
The “?” mark will change back to the arrow marker
(
,), and operations with the displayed page are
enabled.
To return to the TOP MENU screen
Align the arrow marker (
,) with “TOP” at the top right of
the menu page, and press the MENU SELECT switch
toward ENTER.
The TOP MENU screen is resumed.
Setting the Menu Items
If a “?” mark is flashing at the left of the page number,
press the MENU SELECT switch toward ENTER to
change the arrow marker (
,). Setting on the displayed
page is enabled.
1
Rotate the MENU SELECT knob to align the arrow
marker (
,) with the desired item.
2
Press the MENU SELECT switch toward ENTER.
The arrow marker (
,) will change to a flashing “?”
mark.
3
Rotate the MENU SELECT knob to change the setting
value.
When the knob is rotated quickly, the values will
change quickly; when rotated slowly, the values will
change slowly.
To reset a changed value
If you press the MENU SELECT switch toward
CANCEL, before pressing the MENU SELECT
switch toward ENTER, the setting will be returned to
its previous value.
To interrupt settings
Set the DISPLAY switch to OFF to turn off the menu
screen display.
The setting can be restarted by setting the DISPLAY
switch back to MENU.
4
Press the MENU SELECT switch toward ENTER.
The “?” mark will change back to the arrow marker
(
,), and the new setting will be saved.
5
To change other setting items on the same menu page,
repeat steps 1 through 4.
To specify a character string
When you press the MENU SELECT switch toward
ENTER with the arrow marker (
,) pointing to an item for
which a character string, such as a file ID, is to be
specified, a cursor and the list of selectable characters are
displayed.
The displayed cursor can be moved by rotating the MENU
SELECT knob.
1
Set the cursor to the position where you wish to enter
a character, then press the MENU SELECT switch
toward ENTER.
Another cursor appears on the character list.
2
Set the cursor to the character to be entered and press
the MENU SELECT switch toward ENTER.
Repeat steps 1 and 2.
By selecting INS on the line below the character list,
you can enter a space at the cursor position.
Selecting DEL deletes the character at the cursor
position.
You can return to step 1 without changing the
character by selecting RET.
If you enter the permitted maximum number of
characters (up to the stop mark at the right end of the
line), the cursor moves to ESC on the line below the
character list.
To register the new string you have set, select END
and press the MENU SELECT switch toward
ENTER.
To restore the previous string, select ESC and press
the MENU SELECT switch toward ENTER.
To return a menu item to its standard value
Select the menu item to be returned to its standard value
then press the MENU SELECT switch toward ENTER and
hold it for 3 seconds while the arrow marker (
,) is
displayed.
If “10 SEC CLEAR” has been set to ON on the <FILE
CLEAR> page of the FILE menu, you can return the
setting in the reference file for the item being selected to
the factory-set value by pressing the MENU SELECT
switch toward ENTER and holding it for another 10
seconds.
To end menu operations
Set the DISPLAY switch to OFF.
<VF DETAIL> 04 TOP
VF DETAIL : ON 25%
CRISP : 0
FREQUENCY: 9M
FAT MODE : OFF
FLICKER : OFF
AREA : 70%
ZOOM LINK: 100%
COLOR DETAIL : ON BLUE
PEAK COLOR : ON
CHROMA LEVEL: 100%