105
Troubleshooting
Warnings and
messages
The following messages may appear on the screen.
Message Meaning/Corrective Action
No Memory Stick • Insert a “Memory Stick” (page 18).
System error • Turn the power off and on again (page 15).
Memory Stick error • The inserted “Memory Stick” cannot be used in your camera (page 116).
• The “Memory Stick” is damaged.
• The terminal section of the “Memory Stick” is dirty.
• Insert the “Memory Stick” correctly (page 18).
Memory Stick type error • The inserted “Memory Stick” cannot be used in your camera (page 116).
Format error • Failed to format the “Memory Stick.” Format the “Memory Stick” again (page 42).
Memory Stick locked
• The write-protect switch on the “Memory Stick” is set to the LOCK position. Set it to the recording position
(page 116).
No memory space
• The capacity of the “Memory Stick” is insufficient. You cannot record images. Delete unnecessary images
(pages 40 and 78).
Read only memory
• Your camera cannot record or delete images to this “Memory Stick.”
No file in this folder • No images have been recorded in this folder.
Folder error • A folder with the same first three digits number already exists in the “Memory Stick.” (For example: 123MSDCF
and 123ABCDE) Select other folders, or create a new folder.
Cannot create more folders • The folder whose first three digits of the name is “999” exists in the “Memory Stick.” You cannot create any folders.
Cannot record • The camera cannot record images in the selected folder. Select a different folder (page 46).
File error • An error occurred while playing back the image.
File protect • The image is protected against erasure. Release the protection (page 67).
For "InfoLITHIUM" battery
only
• The battery pack is not the “InfoLITHIUM” type.
Image size over • You are playing back an image of a size that cannot be played back on your camera.