Filter
Top Products
12
, Connect the power cord (mains
lead) to the AC Adaptor and to
a wall outlet (wall socket).
The /CHG lamp lights up when charging
begins, and goes off when charging is
completed.
• After charging the battery pack, disconnect the
AC Adaptor from the DC IN jack of your
camera.
To remove the battery pack
Open the battery/“Memory Stick” cover.
Slide the battery eject lever in the direction
of the arrow, and remove the battery pack.
• Be careful not to drop the battery pack when
removing it.
Battery remaining indicator
The battery remaining indicator on the LCD
screen shows the remaining shooting or
viewing time.
• When you switch the LCD screen on/off, it
takes about one minute for the correct battery
remaining time to appear.
• The displayed time remaining may not be
correct under certain circumstances or
conditions.
Charging time
Approximate time to charge a completely
discharged battery pack using the AC
Adaptor at a temperature of 25°C (77°F).
• The charging time may become longer under
certain circumstances or conditions.
4
Power cord
(mains lead)
2 To wall outlet (wall socket)
1
/CHG lamp
Battery eject lever
Battery pack
Charging time
(min.)
NP-FR1 (supplied) Approx. 200
60min
Remaining indicator
Remaining time