Filter
Top Products
38
Viewing images on a TV screen
, Connect the supplied cable for
multi-use terminal (A/V) to the
multi connector of the camera
and the audio/video input jacks
of the TV.
Place the camera with the LCD screen
facing upwards. If your TV has stereo input
jacks, connect the audio plug (black) of the
cable for multi-use terminal (A/V) to the
left audio jack.
• Turn off both your camera and the TV before
connecting the camera and the TV with the
cable for multi-use terminal (A/V).
, Turn on the TV and set the TV/
Video switch to “Video”.
• The name and location of this switch may differ
depending on your TV. For details, see the
operating instructions supplied with the TV.
, Set the mode dial to , and
turn on the camera.
Press b/B on the control button to select the
desired image.
• When using your camera abroad, it may be
necessary to switch the video output signal to
match that of your TV system (page 114).
1
To multi connector
Cable for multi-use terminal (A/V)
2
TV/Video switch
3
BACK/NEXT
10:30
PM
2005 1 1101-0002
VOLUME
VGA
60min
2/9
101