Filter
Top Products
11
Getting started
Charging the battery pack
, Open the battery/“Memory
Stick” cover.
Slide the cover in the direction of the arrow.
• Be sure to turn off your camera when
charging the battery pack (page 15).
• Your camera operates with the
“InfoLITHIUM” NP-FR1 battery pack (R type)
(supplied). You can use only R type battery
pack (page 117).
, Install the battery pack, then
close the battery/“Memory
Stick” cover.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
Battery insertion slot
Insert the battery pack so
that the tip of the v
marks on the side of the
battery pack face the tip
of the v mark on the
battery insertion slot.
• The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment toward the front of the camera.
, Open the DC IN jack cover and
connect the AC Adaptor
(supplied) to the DC IN jack of
your camera.
Open the cover in the arrow direction as
illustrated above. Connect the DC plug with
the v mark facing the LCD screen side.
• Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.
• Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.
1
2
Battery eject lever
Surface with the “InfoLITHIUM” logo
3
DC plug
AC Adaptor
DC IN jack cover
Getting started