Filter
Top Products
Recording an image from a tape as a still
image
- Except DCR-TRV16
Your camcorder can read moving picture data recorded on a tape and record it as a still
image on a "Memory Stick". Your camcorder can also captore moving picture data
through the input connector and record it as a still image on a "Memory Stick".
Beforeoperation
•Insert a recorded tape into your camcorder.
• Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press D,_. Moving picture recorded on the tape is played back.
(3) Keep pressing PHOTO lightly until the picture from the tape freezes,
CAPTURE appears on the screen. Recording does not stm_ yet. To change from
the image selected to another image, release PHOTO once and press it lighdy
again.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on
the "Memory Stick." Recording is complete when the bar scroll indicator
disappears.
3
o
F,"
0
T_
o
==,
Image size of still images
Image size isautomatically set to 640× 480.
When the access lamp is lit or flashing
Do not shake or strike the unit. Also, do not turn the power off, eject a "Memory Stick".
Otherwise, image data may become damaged.
If "_5]" appears on the screen
The inserted "Memory Stick" is incompatible with your camcorder because its format
does not conform with your camcorder. Check the format of the "Memory Stick."
117