Filter
Top Products
Step 3 Inserting a cassette
(1) Prepare the power supply.
(2) Slide L OPEN/EJECT in the direction of the arrow and open the lid. The
cassette compmlment automatically lifts up and opens.
(3) Push the center of the cassette back to insert the cassette.
Insert the cassette straight as far as possible into the cassette compartment with
the window facing up. -_,
(4) Close the cassette compartment by pressing [N*_]on the cassette compartment. ":
The
cassette compartment automatically goes down.
(5) After the cassette compartment going down completely, close the lid until it _[
clicks.
OPEN/EJECT
3, 4
5
To eject a cassette
Follow tile procedure above, and take out the cassette in step 3.
Notes
• Do not press tile cassette conlpartlnent down forcibly. Doing so may cause a
malfunction.
• The cassetle compartment may not be closed when you press any part of tile cassette
compartment other than the _ mark.
When you use a cassette with cassette memory
Read the instruction about cassette memory to use this function properly (p. 194).
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
When ejecting a cassette
Do not press EDITSEARCH.
25