Filter
Top Products
Changing the menu settings
POWER
Icon/item Mode Meaning switch
MEMORY SET(except DCR-TRV16)
PRINTMARK ON To write a print mark on recorded still images VCR
you want to print out later {p. 151) MEMORY
• OFF To cancel print marks on still images
PROTECT ON To protect selected still images against VCR
accidental erasure {p. 148) MEMORY
• OFF To not protect still images
SLIDESHOW To play back images in a continuous loop MEMORY
(p. 147)
PHOTO SAVE To copy mini DV still pictures on "Memory VCR
Stick"(p. 135)
FILENO. • SERIES To assign numbers to file in sequence even if the VCR
"Memory Stick" is changed MEMORY
RESET To reset the file numbering each time the
"Memory Stick" is changed
DELETEALL To delete all unprotected images (p. 150) MEMORY
FORMAT • RETURN To cancel formatting MEMORY
OK To format an inserted "Memory Stick"
Formatting erases all information on the
"Memory Stick".
Check the contents of the "Memory Stick"
before formatting.
1. Select FORMAT with the SEL/PUSH EXEC
dial then press the dial.
2. Turn the SEL/PUSH EXEC dial to select OK,
then press the dial.
3. After "EXECUTE" appears, press the SEL/
PUSH EXEC dial. "FORMATTING" flashes
during formatting. "COMPLETE" appears
when formatting is finished.
Notes on formatting (except DCR-TRV16)
• Supplied or optional "Memory Stick % have been formatted at factory. Formatting
"Memory Stick's on your camcorder is not required.
• Do not do any of the following while FORMATTING is displayed:
Switch the POWER switch
Operate buttons
Eject the "Memory Stick"
• You cannot format the "Memory Stick" if the write-protect tab on the "Memory Stick"
is set to LOCK.
• Format again if the message "_2 FORMAT ERROR" appears.
• Formatting erases protected image data on the "Memo_ T Stick."
180