Sony DCR-TRV25 Camcorder User Manual


 
Recording still images on a tape
- Tape Photo recording
You can record still images such as photographs on tapes.
You can record about 510 images in the SP mode and about 765 images in the LP mode
on a 60-minute tape.
(1) In the recording standby, set PHOTO REC in _ to TAPE in the menu settings
(p. 177). (except DCR-TRVI6)
(2) Keep pressing PHOTO lightly until a still image appears.
The picture becomes still image and the CAPTURE indicator appears.
Recording does not start yet.
To change the still image, release PHOTO, and then press and hold PHOTO
lightly.
(3) Press PHOTO deeper.
The still image on the screen is recorded for about seven seconds. The sound
during those seven seconds is also recorded. The still image is displayed on the
screen until recording is completed.
2
Recording images with self-timer (except DCR-TRV16)
(1) Set PHOTO REC in _ to TAPE in the menu settings (p. 177).
(2) Follow steps 1 and 4 on page 45.
Notes
During tape photo recording, you cannot change tile mode or setting.
• When recording a still image, do not shake your camcorder. The image may fluctuate.
• The tape photo recording does not work while using the following functions. The
[_q_ indicator flashes.:
Fader
Digital effect
46