Sony DCR-TRV25 Camcorder User Manual


 
About the "InfoLITHIUM" battery pack
Remaining battery time indicator
If the power goes off although the remaining battery time indicator indicates that the
battery pack has enough power to operate, charge the battery pack fully again so that
the indication on the remaining battery time indicator is correct. Note, however, that
the correct battery indication sometimes will not be restored if it is used in high
temperatures for a long time or left in a fully charged state, or the battery pack is
frequently used. Regard tile remaining batieI[y time indication as the approximate
shooting time.
The c\_ mark indicating that there is little remaining battery time sometimes flashes
depending on the operating conditions or ambient temperature and environment even
if the remaining battery time is about five to ten minutes.
How to store the battery pack
If the battery pack is not used for a long time, do the following procedure once per
year to maintain proper function.
1. Fully charge the battery.
2. Discharge on your electronic equipment.
3. Remove the battery from the equipment and store it in a dry, cool place.
• To use the battery pack up on your camcorder, leave your camcorder in the recording
standby mode until the power goes off without a cassette inserted.
Battery life
• Tile battery life is limited. Battery capacity drops little by little as you use it more and
more, and as time passes. When the available battery time is shortened considerably, a
probable cause is that the battery pack has reached the end of its life. Buy a new
battery pack.
• The battery life varies according to how it is stored and operating conditions and
environment for each battery pack.
198