Filter
Top Products
Preventing accidental erasure
- Image protection
- Except DCR-TRV16
You can protect selected images to prevent accidental erasure of important images.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left {unlock) position.
(2) Play back the image you want to protect.
(3) Press MENU, then select PROTECT in _ with the SEE/PUSH EXEC dial
(p. 180).
(4) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(5) Press MENU to make the menu display disappear. The "o--," mark is
displayed.
MENU
3
To cancel image protection
Select OFF in step 4, then press the SEL/PUSH EXEC dial. The "_,," indicator
disappears.
Note
Formatting erases all information on the "Memory Stick," including the protected
image data. Before formatting a "Memory Stick", check its contents.
If the write=protect tab on the "Memory Stick" isset to LOCK
You cannot protect hnages.
148