Filter
Top Products
Types of trouble and how to correct trouble
Symptom Cause and/or Corrective Actions
You cannot write a print mark oi1 • TIRewrite-protect tab oi1 the "Memory Stick" is set to
the still image. LOCK.
÷ Release the lock. (p. 105)
• The image to write a print mark is not played back.
÷ Press MEMORY PLAY to play back the image. (p. 137)
• You are trying to write a print mark on a moving picture.
+ Print marks cannot be written on a moving picture.
The photo save function does not • The write-protect tab on the "Memory Stick" is set to
work. LOCK.
+ R_lease the lock. (p. 105)
You cannot play back images in • You may not be able to play back images in actual size
actual size. when you try to play back images recorded by other
equipment. This is not a malfunction.
You cannot play back image data. • Your camcorder cannot play back some images processed
with a computer {The file name will blink).
• If you record images with any other equipment, the
images may not play back normally on your camcorder.
Symptom Cause and/or Corrective Actions
The title is not rPco_-ded. • TIRecassette has ilo cassette memory.
The cassette label is not recorded.
Digital program editing to a tape
does not function.
+ Use a cassette with cassette memory. {p. 98)
• The cassette memory is full.
÷ Erase unwanted title. (p. 100)
• The cassette is set to prevent accidental erasure.
+ Slide the write-protect tab so that red portion is not
visible. (p. 25)
• The tape has a blank portion between recorded portions.
÷ Superimpose the title to a recorded portion. (p. 98)
• The cassette has no cassette memory.
+ Use a cassette with cassette memory. {p. 103)
• The cassette memory is full.
÷ Erase unwanted titles. (p. 100)
• The cassette is set to prevent accidental erasure.
+ Slide the write-protect tab so that red mark is not visible.
(p.25)
• The input selector on the VCR is not set correctly.
+ Check the connection and set the input selector on the
VCR again (p. 78)
• The camcorder is connected to DV equipment of other
than Sony using the i.LINK cable (DV connecting cable).
÷ Set it to IR {p. 83).
• Setting program on a blank portion of the tape is
attempted.
+ Set the program again on a recorded portion (p. 86).
• The camcorder and the VCR are not synchronized.
+ Adjust the synchronization (p. 84).
• The IR SETUP code is incorrect.
+ Set the correct code (p. 79).
(continued on the following page)
8
C
o-
o
189