Filter
Top Products
A-2
Appendix Models 5000B
Teledyne Analytical Instruments
Typical Analytical Performance Specifications:
(
will vary per application)
Accuracy: ±2% of full scale or better, application dependent
Noise: Less than ±1%
Diurnal: Less than 1% per 20
o
F (10
o
C (source/detector
dependent)
Sample Cell: Stainless steel with Sapphire window
standard. Other materials available.
Cell Length: .01 to 10 inches
Flow Rate: 50 to 1500 cc/min
Light Source: Tungsten Mini-Lamp, optional Quartz Halogen
Sensitivity: .015 to 3 absorbance units.
Reproducibility: +/- 1% of scale or better
Filter Wavelength: 750nm to 5 microns, application dependant
Sample Pressure: Sapphire window 250 psi
Response time: Programmable
Other Specifications:
Ambient temp range: 32-122 °F (0-50 °C)
Internal calibration: Optical span flag/zero and span calibration
NOTE: 5000B/5020B (sample temperature sensing and output correction)
Power Rating: 115/230 VAC, 50/60 Hz, Approx 200 watts
Readout Device: Digital, 2 line alphanumeric vacuum fluorescent display,
(VFD)
Analog Output Signal: 0-1 V (standard), 4-20mA isolated
Area Classification
Non-hazardous:Model 5000B
Hazardous / Explosion-proof: Model 5020
5000B, 5020B Purge options:X, Y, Z purge, Cenelec IIB
AND H2 (PENDING) FOR ZONE I OR CLASS I, DIV I, B, C, D
AREAS