Filter
Top Products
TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)
©TOSHIBA Corp.
20
From the last page.
Item Type Entry name Entry value Std.val Unit
Recording Cycle (type=Normal) Interval 1/2/3/5/10/30/60/120/180 60 second
Overwrite type=RecOverwriting Mode 1:OFF 2:ON 1 -
Log output control of cgi common to all types OpeLog No/Yes [default: Yes] (omissible) - -
1.4.3 Output
Code Status Code Status Code Status
20 OK 33 InvalidOperand 52 OKbutExtControlOFF
30 InvalidType 34 NoEntryData 92 CriticalErro
r
31 InvalidEntr
y
50 OKbutExtAlarmOFF
32 InvalidValue 51 OKbutMotionOFF
- 50: Although registration succeeded under conditions of both type=alarm and AlarmInRecMode=2, the Alarm In function is set to “OFF”.
(Ref. Alarm Settings)
- 51: Although registration succeeded under conditions of both type=alarm and MotionRecMode=2, the Motion Detection function is set to “OFF”.
(Ref. Alarm Settings)
- 52: Although registration succeeded under conditions of both type=alarm and ExtControlInRecMode=2, the Ext. Control In function is set to “OFF”.
(Ref. Alarm Settings)
1.4.4 Example
1) http://10.1.0.1/api/wbsetcamrecord.cgi?type=Default
2) http://10.1.0.1/api/wbsetcamrecord.cgi?type=Alarm&AlarmInRecMode=1&ExtControlInRecMode=2&MotionRecMode=2&NumberOfPre
Picture=3&NumberOfPostPicture=10
3) http://10.1.0.1/api/wbsetcamrecord.cgi?type=Normal&Mode=1
4) http://10.1.0.1/api/wbsetcamrecord.cgi?type=RecOverwriting&Mode=1
1.4.5 Notes
1) If only type=<value> is entered and then <entry>=<value> is not entered, no setting is performed. (type=Default is an exception.)
2) Multiple type=<value> cannot be enumerated simultaneously. This API must be started for each type.
3) For only entered item, setting is performed. For the other items, their existing values are held.
4) OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.
5) If both AlarmInRecMode=2 and MotionRecMode=2 are simultaneously specified in the alarm setting OFF status at type=Alarm, the
‘Alarm In’ status always has priority at status notification.