Filter
Top Products
TOSHIBA Network Camera - IK-WB15A - SDK (Ver 1.00.SC)
©TOSHIBA Corp.
86
10.1 Reference of Pan/Tilt Basic Settings
wbgetptbasic.cgi
10.1.1 Syntax
1) http://<camip>/api/wbgetptbasic.cgi
10.1.2 Input
Item Type Entry name Value
Log output control of cgi common to all types OpeLog No/Yes [default: Yes] (omissible)
10.1.3 Output
Code Status Code Status
20 OK 92 CriticalErro
r
32 InvalidValue
33 InvalidOperand
wbgetptbasic.cgi indicates the notification data format to the client when data has been obtained normally.
20 OK\r\n
\r\n
[PanTilt-General]\r\n
<PTCondition>\r\n
ScanSpeed (value)\r\n
PowerUp (value)\r\n
FreezeFrame (value)\r\n
<AssociationToAlarm>\r\n
Mode (value)\r\n
PTByAlarmIn (value)\r\n
PTByMotion (value)\r\n
PresetNumber (value)\r\n
Resume (value)\r\n
ResumeTime (value)\r\n
<LeftLimitSetting>\r\n
Mode (value)\r\n
Degree (value)\r\n
<RightLimitSetting>\r\n
Mode (value)\r\n
Degree (value)\r\n
<TopLimitSetting>\r\n
Mode (value)\r\n
Degree (value)\r\n
<BottomLimitSetting>\r\n
Mode (value)\r\n
Degree (value)\r\n
10.1.4 Example
1) http://10.1.0.1/api/wbgetptbasic.cgi
10.1.5 Notes
1) When OpeLog=No is entered, a log related to API start/end is not output. When it is omitted, it is regarded as OpeLog=Yes.
2)
All the parameters given to ‘Degree’ are based on “Ceiling Mount”. Refer to Appendix C for details.