Filter
Top Products
10
ADC UPDATE RATE
HIGH
LOW<DEFAULT>
TRIGGER SOURCE
Choosing the trigger signals source.
IMMEDIATE<DEF>
Trigger signals from
Shift
+
Trigger
key
EXTERNAL
Trigger signals from the TRIG connector in the rear panel.
BUS
Communication command trigger mode.
CONNECT MODE
MAXTIDLEXING
SEPARATE<DEF>
BAUDRATE SET
Setting baud rate.
4800<DEFAULT>
9600
19200
38400
COMM. PARITY SET
Command parity setting.
NONE<DEFAULT>
EVEN
ODD
ADDRESS SET
Setting communication Flow mode
KEY LOCK SET
Setting keypad password.
Press
Enter
directly to disable the key lock function.
EXIT
SYSTTEM SET
MAX CURRENT SET
Setup the Maximum current.
MAX POWER SET
Setup the Maximum Power.
MAX VOLTAGE SET
Setup the Maximum Voltage.
VOLTAGE ONSET
VOLTAGE OFFSET
EXIT
LIST SET
MODE SET
Setting operation mode.
FIXED MODE
Fixed mode.
LIST MODE
Choosing List mode.
CALL LIST FILE
Recall list operation file.
EDIT LIST FILE
Edit list operation file.
LIST STORE MODE
Users can choose 4 kind of memory space to save the list file.
8 X 120 STEPS
Total 8 files and each file have120 list steps.
4 X 250 STEPS
Total 4 files and each file have250 list steps.
2 X 500 STEPS
Total 2 files and each file have500 list steps.
1 X 1000 STEPS
Total 1 file and each file have1000 list steps.
EXIT
LOAD ON TIMER
TIMER STATE
Setting LOAD ON timer state