Filter
Top Products
36
0-100W ±(1%+0.1%FS) 1mW
CW Mode Regulation
Input current ≥FS 10%
Input Voltage≥FS 10%
）
100-600W ±(1%+0.1%FS) 100mW
0-12A ±(0.1% + 0.1%FS) 1mA
Current Measurement
0-120A ±(0.2%+0.15%FS) 10mA
0-18V ±(0.02% + 0.02%FS) 1mV
Voltage Measurement
0-120V ±(0.02% + 0.025%FS) 10mV
0-100W ±(1%+0.1%FS) 1mW
Power Measurement
Input current≥FS 10%
Input Voltage≥FS 10%
）
100-600W ±(1%+0.1%FS) 100mW
Battery testing function
Input=0.8-120V Max measurement capacity= 999A/H
Resolution =10mA Timer range=1~60000sec
Transition Mode
Range o Frequency 0.1Hz-1kHz Frequency error rate
＜
0.5%
Weight 30.8 lb. (14kg)
NOTE:
Specifications and information are subject to change without notice. Please visit www.bkprecision.com for
the most current product information.
Remote Operation Mode
The DB9 connector in the rear panel of the electronic load can be connected to a RS-232 or USB
interface via a communication cable. The following information may help you to know how to control
the input of electronic load through PC.
1 Communication cable
IT-E131 RS232 Communication cable
The DB9 interface connector on the rear panel of electronic load is TTL voltage level; you can use the communication
cable (IT-E131) to connect the DB9 interface connector of the electronic load and the RS-232 interface connector of
computer for the communication.
PC Load
IT-E131 communication
cable
COMPUTER
INSTRUMENT
RX
TX
IT-E131 ISOLATED
COMMUNICATION CABLE
TTL(5 V)RS232 ISOLATION
859666668889942311
IT
IT-E132 USB Communication cable